Black Socket Cap

Black Socket Cap

Roadpro 12V Fused Replacement Cigarette Lighter Plug with Leads

$3.00

Roadpro Platinum Series 12-volt Fused Replacement Cigarette Lighter Plug With Leads – Roadpro RPPS-225….

Stanley 66-358 Stanley Stubby Ratcheting MultiBit Screwdriver

$5.25

Stanley Tools 66-358 Multibit Stubby Screwdriver With Bit HolderStanley Tools 66-358 Multibit Stubby Screwdriver With Bit Holder Features:; Stubby screwdriver; Magnetic bit holder; Ratchet handle; Durable bimaterial hand grip; Chromium vanadium bits; Compartment for 6 bits; Carded…

Battery Tender 2-Pin 25 Foot Extension Lead

$14.95

Battery Tender 2-Pin 25 Foot Extension Lead 25 ft. Extension Lead for use to extend the length of the chargers reach from input to batteryUse the 25 ft. long lead extension with the Battery Tender Junior, Plus, 4, 5, or 10 Bank unitsNot for use with the 6 Volt Battery Tender Plus or any other Battery Tender product with white disconnect plugs…

Safety 1st Outlet Cover with Cord Shortener

$2.00

For total outlet protection, this home safety aid covers an entire outlet with plugs and includes a built-in cord shortener. Features: Child-resistant dual press releaseBuilt-in cord shortener prevents entanglementIdeal for outlets in usecovers one receptacle…

SOG Specialty Knives & Tools B61-N EOD PowerLock, Black Oxide

$120.00

GSA-approved, the B61-N EOD PowerLock multi-tool with black oxide finish showcases SOG’s quality construction and military-grade performance. An ideal tool for crimping blasting caps and demolition cord without a lot of hand pressure, the B61-N comes with many EOD-specific features, including a crimper device within the handle that allows for uninterrupted use of the plying surface..caption {font-…

Cyborg Gaming Keyboard with Tri-Color Backlighting

$66.41

Multi-color backlighting mixing shades from red through amber to greenTouch-sensitive backlit dashboard control panelWASD cursor Cyborg and NumPad keys can be lit independently from the rest of the keyboard to highlight monly used gaming keys Cyborg Mode: instantly disable the Windows keys and change the color and brightness of the gaming keys at the touch of a button12 programmable Cyborg keysPow…

Bluecell 3 Set Black/White/Clear Anti-Dust Dock Jack Cover Plug Stopper for iPhone 3G 3GS 4 IPAD + Bluecell Cable Tie

$5.29

Package included: 3 X anti-dust earphone cover with pin & 3 X dock cover.
Color: Black, Clear & White.
Material: Soft Silicone.
prevent dust and debris, built-in pin for taken out the sim card.
Fits for iPhone 3G/3GS/4 and iPad/iPad2….

Kensington Travel Plug Adapter with USB Charger (33346)

$19.99

Safely plug-in to charge USB patible audio devicesSafety release button and built-in fuse ensures safe operation 1-year warrantyIncludes spare fuse…

Du-Bro 316 6-32 x 1-1/4 Socket Head Cap Screw (4-Pack)

$1.26

Packages of 4. Black Oxide plated….

Marinco 150BBI Marine On-Board Charger Inlet (15-Amp, 125-Volt, Black)

$17.26

Guest Shore Power Systems On – board Charger Inlet… for safe, convenient battery charging! The Inlet mounts on your boat’s exterior and hard-wired directly to the charger. Just open the flip lid cover and plug an extension cord into the Inlet to bring charging power to your boat’s batteries. All of the hatches remain closed and locked throughout the charging cycle, which adds an element and safe…

TempFence Ground Socket

$22.05

Fence Individual Ground SocketExtremely DurableFeatures:12 in. Long black high gloss matching PVC ground socket to hold the 1.32 in. poleEach ground socket will have a pointed bottom tip and a cap to cover the socket when the pole is removed

Ground Socket With Cap

$7.26

Additional or replacement MarkSmart Ground Socket with Cap. Sold in eaches.

Socket

$27.99

Handheld cover – black Product Description: Socket FlexGuard handheld coverProduct Type: Handheld coverColor: BlackProduct Material: Silicone

Trigon Sports BTFGS TempFence Ground Socket

$25.03

12 Long black high gloss matching PVC ground socket to hold the 15/16 pole. Each ground socket will have a pointed bottom tip and a cap to cover the socket when the pole is removed.

Socket Cap Screws BZP M6 x 20mm Pack of 50

$3.19

BZP. Socket cap head.

Socket Cap Screws BZP M5 x 12mm Pack of 50

$2.37

BZP. Socket cap head.

Socket Cap Screws BZP M5 x 20mm Pack of 50

$2.64

BZP. Socket cap head.

Socket Cap Screws BZP M8 x 20mm Pack of 50

$3.96

BZP. Socket cap head.

NCT6034 Fork Cap Socket for Harley Davidsons

$56.69

This tool is used to remove/install the fork cap nuts on most Harley Davidsons. Made from heat treated carbon steel. Hevy duty design. Fits 13/8 Fork Nuts. Black Oxided finish. Satisfaction ensured. Offering the latest select

Trigon Sports BTFGS11 100 ft. TempFence Ground Socket set 11

$79.62

12 Long black high gloss matching PVC ground socket to hold the 15/16 pole. Each ground socket will have a pointed bottom tip and a cap to cover the socket when the pole is removed.

Power Socket 12-Volt Power Socket-12 Volt (Socket & Cap)

$3.82

Power Socket 12-Volt Power Socket-12 Volt (Socket & Cap) Maximum rating: 24 Volts, 16 Amps.

100 ft. TempFence Ground Socket – 11 Pc. Set

$73.83

100ft. Outfield Fence Ground Socket Set of 11 Extremely DurableFeatures: 12 in. Long black high gloss matching PVC ground socket to hold the 1.32 in. poleEach ground socket will have a pointed bottom tip and a cap to cover the socket when the pole is removed

150 ft. TempFence Ground Socket – 16 Pc. Set

$97.67

150ft. Outfield Fence Ground Socket Set of 16 Extremely DurableFeatures:12 in. Long black high gloss matching PVC ground socket to hold the 1.32 in. poleEach ground socket will have a pointed bottom tip and a cap to cover the socket when the pole is removed

314 ft. TempFence Ground Socket – 32 Pc. Set

$189.06

314ft. Outfield Fence Ground Socket Set of 32Extremely DurableFeatures: 12 in. Long black high gloss matching PVC ground socket to hold the 1.32 in. poleEach ground socket will have a pointed bottom tip and a cap to cover the socket when the pole is removed

50 ft. TempFence Ground Socket – 6 Pc. Set

$55.47

50ft.Outfield Fence Ground Socket set of 6 Extremely Durable12 in. Long black high gloss matching PVC ground socket to hold the 1.32 in. poleEach ground socket will have a pointed bottom tip and a cap to cover the socket when the pole is removed

Trigon Sports BTFGS32 314 ft. TempFence Ground Socket set 32

$230.73

314 Outfield Fence Ground Socket Set of 32. Extremely Durable. 12 Long black high gloss matching PVC ground socket to hold the 15/16 pole. Each ground socket will have a pointed bottom tip and a cap to cover the socket when the pole is removed.

Trigon Sports BTFGS48 471 ft. TempFence Ground Socket set 48

$294.15

471 Outfield Fence Ground Socket Set of 48. 12 Long black high gloss matching PVC ground socket to hold the 15/16 pole. Each ground socket will have a pointed bottom tip and a cap to cover the socket when the pole is removed.

Trigon Sports BTFGS6 50 ft. TempFence Ground Socket set 6

$58.86

50 Outfield Fence Ground Socket set of (6) Extremely Durable. 12 Long black high gloss matching PVC ground socket to hold the 15/16 pole. Each ground socket will have a pointed bottom tip and a cap to cover the socket when the pole is removed.

Trigon Sports BTFGS16 150 ft. TempFence Ground Socket set 16

$111

150 Outfield Fence Ground Socket Set of (16) Extremely Durable. 12 Long black high gloss matching PVC ground socket to hold the 15/16 pole. Each ground socket will have a pointed bottom tip and a cap to cover the socket when the pole is removed.

MSD Ignition Custom Spark Plug Wire Set – w/Socket Distributor Cap – Black Super Conductor 8.5mm

$98.6

[67-74 C15/C1500 Pickup;;67-74 C25/C2500 Pickup;;67-74 C35/C3500 Pickup;;67-74 K15/K1500 Pickup;;67-74 K25/K2500 Pickup;;67-74 K35/K3500 Pickup] Custom Spark Plug Wire Set w/Socket Distributor Cap;;Socket Style;;Wires Below Header/Exh. Man.;;Black Super Conductor 8.5mm;;Silicone And Synthetic Durable Sleeve;;Glass Braid And Strong Dielectric Insulator;;Copper Alloy Conductor;;Ferro-Magnetic Core Creates An EMI Choke;;Stainless Steel Locking Tab Clicks Onto Terminal;;Silicone And Synthetic Heat Resistant Boot;;20 percent More Material Used In Each Boot;;Large Crimp Tabs w/Barbs

MSD Ignition Custom Spark Plug Wire Set – w/Socket Distributor Cap – Black Super Conductor 8.5mm [67-74 Camaro]

$98.6

Custom Spark Plug Wire Set w/Socket Distributor Cap;;Socket Style;;Wires Below Header/Exh. Man. Black Super Conductor 8.5mm;;Silicone And Synthetic Durable Sleeve;;Glass Braid And Strong Dielectric Insulator;;Copper Alloy Conductor;;Ferro-Magnetic Core Creates An EMI Choke;;Stainless Steel Locking Tab Clicks Onto Terminal;;Silicone And Synthetic Heat Resistant Boot;;20 percent More Material Used In Each Boot;;Large Crimp Tabs w/Barbs

MSD Ignition Custom Spark Plug Wire Set – w/Socket Distributor Cap – Black Super Conductor 8.5mm [55-74 Corvette]

$98.6

Custom Spark Plug Wire Set w/Socket Distributor Cap;;Socket Style;;Wires Below Header/Exh. Man. Black Super Conductor 8.5mm;;Silicone And Synthetic Durable Sleeve;;Glass Braid And Strong Dielectric Insulator;;Copper Alloy Conductor;;Ferro-Magnetic Core Creates An EMI Choke;;Stainless Steel Locking Tab Clicks Onto Terminal;;Silicone And Synthetic Heat Resistant Boot;;20 percent More Material Used In Each Boot;;Large Crimp Tabs w/Barbs

MSD Ignition Custom Spark Plug Wire Set – w/Socket Distributor Cap – Black Super Conductor 8.5mm [64-73 Chevelle]

$98.6

Custom Spark Plug Wire Set w/Socket Distributor Cap;;Socket Style;;Wires Below Header/Exh. Man. Black Super Conductor 8.5mm;;Silicone And Synthetic Durable Sleeve;;Glass Braid And Strong Dielectric Insulator;;Copper Alloy Conductor;;Ferro-Magnetic Core Creates An EMI Choke;;Stainless Steel Locking Tab Clicks Onto Terminal;;Silicone And Synthetic Heat Resistant Boot;;20 percent More Material Used In Each Boot;;Large Crimp Tabs w/Barbs

MSD Ignition Custom Spark Plug Wire Set – w/Socket Distributor Cap – Black Super Conductor 8.5mm [67-72 Camaro]

$100

Custom Spark Plug Wire Set w/Socket Distributor Cap;;Socket Style;;Wires Below Header/Exh. Man. Black Super Conductor 8.5mm;;Silicone And Synthetic Durable Sleeve;;Glass Braid And Strong Dielectric Insulator;;Copper Alloy Conductor;;Ferro-Magnetic Core Creates An EMI Choke;;Stainless Steel Locking Tab Clicks Onto Terminal;;Silicone And Synthetic Heat Resistant Boot;;20 percent More Material Used In Each Boot;;Large Crimp Tabs w/Barbs

MSD Ignition Custom Spark Plug Wire Set – w/Socket Distributor Cap – Black Super Conductor 8.5mm [70-74 Monte Carlo]

$100

Custom Spark Plug Wire Set w/Socket Distributor Cap;;Socket Style;;Wires Below Header/Exh. Man. Black Super Conductor 8.5mm;;Silicone And Synthetic Durable Sleeve;;Glass Braid And Strong Dielectric Insulator;;Copper Alloy Conductor;;Ferro-Magnetic Core Creates An EMI Choke;;Stainless Steel Locking Tab Clicks Onto Terminal;;Silicone And Synthetic Heat Resistant Boot;;20 percent More Material Used In Each Boot;;Large Crimp Tabs w/Barbs

MSD Ignition Custom Spark Plug Wire Set – w/Socket Distributor Cap – Black Super Conductor 8.5mm [69-74 Blazer]

$98.6

Custom Spark Plug Wire Set w/Socket Distributor Cap;;Socket Style;;Wires Below Header/Exh. Man. Black Super Conductor 8.5mm;;Silicone And Synthetic Durable Sleeve;;Glass Braid And Strong Dielectric Insulator;;Copper Alloy Conductor;;Ferro-Magnetic Core Creates An EMI Choke;;Stainless Steel Locking Tab Clicks Onto Terminal;;Silicone And Synthetic Heat Resistant Boot;;20 percent More Material Used In Each Boot;;Large Crimp Tabs w/Barbs

MSD Ignition Custom Spark Plug Wire Set – w/Socket Distributor Cap – Black Super Conductor 8.5mm [62-74 Nova]

$98.6

Custom Spark Plug Wire Set w/Socket Distributor Cap;;Socket Style;;Wires Below Header/Exh. Man. Black Super Conductor 8.5mm;;Silicone And Synthetic Durable Sleeve;;Glass Braid And Strong Dielectric Insulator;;Copper Alloy Conductor;;Ferro-Magnetic Core Creates An EMI Choke;;Stainless Steel Locking Tab Clicks Onto Terminal;;Silicone And Synthetic Heat Resistant Boot;;20 percent More Material Used In Each Boot;;Large Crimp Tabs w/Barbs

MSD Ignition Custom Spark Plug Wire Set – w/Socket Distributor Cap – Black Super Conductor 8.5mm [73 Blazer]

$100

Custom Spark Plug Wire Set w/Socket Distributor Cap;;Socket Style;;Wires Below Header/Exh. Man. Black Super Conductor 8.5mm;;Silicone And Synthetic Durable Sleeve;;Glass Braid And Strong Dielectric Insulator;;Copper Alloy Conductor;;Ferro-Magnetic Core Creates An EMI Choke;;Stainless Steel Locking Tab Clicks Onto Terminal;;Silicone And Synthetic Heat Resistant Boot;;20 percent More Material Used In Each Boot;;Large Crimp Tabs w/Barbs

MSD Ignition Custom Spark Plug Wire Set – w/Socket Distributor Cap – Black Super Conductor 8.5mm [66-74 Corvette]

$100

Custom Spark Plug Wire Set w/Socket Distributor Cap;;Socket Style;;Wires Below Header/Exh. Man. Black Super Conductor 8.5mm;;Silicone And Synthetic Durable Sleeve;;Glass Braid And Strong Dielectric Insulator;;Copper Alloy Conductor;;Ferro-Magnetic Core Creates An EMI Choke;;Stainless Steel Locking Tab Clicks Onto Terminal;;Silicone And Synthetic Heat Resistant Boot;;20 percent More Material Used In Each Boot;;Large Crimp Tabs w/Barbs

MSD Ignition Custom Spark Plug Wire Set – w/Socket Distributor Cap – Black Super Conductor 8.5mm [69-70 Nova]

$100

Custom Spark Plug Wire Set w/Socket Distributor Cap;;Socket Style;;Wires Below Header/Exh. Man. Black Super Conductor 8.5mm;;Silicone And Synthetic Durable Sleeve;;Glass Braid And Strong Dielectric Insulator;;Copper Alloy Conductor;;Ferro-Magnetic Core Creates An EMI Choke;;Stainless Steel Locking Tab Clicks Onto Terminal;;Silicone And Synthetic Heat Resistant Boot;;20 percent More Material Used In Each Boot;;Large Crimp Tabs w/Barbs

MSD Ignition Custom Spark Plug Wire Set – w/Socket Distributor Cap – Black Super Conductor 8.5mm [66-73 Chevelle]

$100

Custom Spark Plug Wire Set w/Socket Distributor Cap;;Socket Style;;Wires Below Header/Exh. Man. Black Super Conductor 8.5mm;;Silicone And Synthetic Durable Sleeve;;Glass Braid And Strong Dielectric Insulator;;Copper Alloy Conductor;;Ferro-Magnetic Core Creates An EMI Choke;;Stainless Steel Locking Tab Clicks Onto Terminal;;Silicone And Synthetic Heat Resistant Boot;;20 percent More Material Used In Each Boot;;Large Crimp Tabs w/Barbs

PHONO SOCKET D SHELL BLACK/BLACK

$2.09

PHONO SOCKET D SHELL BLACK/BLACK

Warn Retrofit Socket Kit

$28.99

Warn Retrofit Socket Kit Fits: Universal Fit Product Information: This kit is designed to retrofit your socket for better use. Kit Includes: Socket Cap for Socket Wires Mounting screws

Replacement Spare Parts Earphone Socket for NDSL (Black)

$1.32

This is a replacement NDSL earphone socket.

Replacement Spare Parts Earphone Socket for NDSi (Black)

$1.32

This is a replacement earphone socket for NDSi .

AN50 – Kim Lighting Bell Accent / Path Light – 120V

$154.85

“<h3>AN50 – Kim Lighting Bell Accent / Path Light – 120V</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: Accent / Path Lighting (<!– OUI_ALT_CODE –>) Finish: Black, Dark Bronze, Verde Green Series: Bell Family: 120 Volt Luminaires Lamping: 50W PAR20 Halogen / 60W A-19 Incandescent Wattage: 50W Halogen / 60W Incandescent Product Details:<ul><li>Housing and Lens Frame: Die-cast low copper alloy aluminum. Frame with silicone gasket, attaches to housing with four captive 1/4-20 stainless steel, slotted cap screws.<li>Arm: Cast aluminum. Head is independently rotatable 360? vertically from top dead center. Head may be positioned straight up. Set screw provided for locking position.<li>Wall Plate: Die-cast low copper alloy aluminum. Attaches to stainless steel plate for mounting to any standard electrical outlet box. Internal set screw provided for locking position.<li>Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.<li>Socket: Porcelain medium base. <li>Wiring: No. 18AWM rated 105?C. <li>Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/120_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

Attwood Round 2-Pin Base f/Straight Pole w/Stainless Steel Cover – Black

$15.49

Round 2-Pin Base f/Straight Pole w/Stainless Steel Cover – BlackPart #: 91024-7Offers clean, fresh styling with a rugged stamped stainless steel cover. Perfect for saltwater applications and high-end boats. The round footprint is only 2-3/8 diameter. When closed, profile is only 3/8 high. Molded inner cap seals water out of the socket when cover is closed. Inner socket contains a large drain hole to prevent clogging and contact failure. For use with all straight pole lights with a locking collar.Features:2-PinBlackRound BaseIncludes Stainless Steel CoverMade for Straight PoleSpecifications:Housing: Black

Attwood Round 3-Pin Base f/Straight Pole w/Stainless Steel Cover – Black

$15.67

Round 3-Pin Base f/Straight Pole w/Stainless Steel Cover – BlackPart #: 91025-7Offers clean, fresh styling with a rugged stamped stainless steel cover. Perfect for saltwater applications and high-end boats. The round footprint is only 2-3/8 diameter. When closed, profile is only 3/8 high. Molded inner cap seals water out of the socket when cover is closed. Inner socket contains a large drain hole to prevent clogging and contact failure. For use with all straight pole lights with a locking collar.Features:3-PinBlackIncludes Stainless Steel CoverMade for Straight PoleRoundSpecifications:Housing: Black

Capped Long-Prong Snaps Size 16 10/Pkg-Black

$1.32

The capped size 16 snap is the most popular style within the line. It’ s the perfect basic snap- a great color selection smooth cap (which d oes not become dented thanks to the unique tool) long prongs which g rip and stay put! Note: All Snap Source caps can be set into either the socket or stud making reversible snaps possible and easy!

Daniel Defense Black Picatinny DD-6001

$58.07

The Daniel Defense Offset Flashlight Mount is designed for use in conjunction with a vertical foregrip which is mounted on the bottom rail. The Offset Flashlight Mount may then be mounted on either side rail for ambidextrous use. It is designed so that as the shooters forward hand grips the vertical foregrip his thumb has quick and perfect access to the rear button of his flashlight. This setup eliminates many accidental light discharges because although the action to the on/off button is quick and natural it is also deliberate. This model attaches utilizing a Socket Head Cap screw. Precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish while weighing in at a mere 1.5 ozs. 6061 T6 Aluminum. Type 3 Hard coat black anodizing. Made in the USA!

EL160 – Kim Lighting Bell Accent / Path Light – 120V

$158.11

“<h3>EL160 – Kim Lighting Bell Accent / Path Light – 120V</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: Accent / Path Lighting (<!– OUI_ALT_CODE –>) Finish: Black, Dark Bronze, Verde Green Series: Bell Family: 120 Volt Luminaires Lamping: 50W PAR20 Halogen / 60W A-19 Incandescent Wattage: 50W Halogen / 60W Incandescent Product Details:<ul><li>Housing and Lens Frame: Die-cast low copper alloy aluminum. Frame with silicone gasket, attaches to housing with four captive 1/4-20 stainless steel, slotted cap screws.<li>Arm: Cast aluminum. Head is independently rotatable 300? vertically from top dead center. Head may be positioned straight up. Horizontal rotation of entire fixture controlled by installation on mounting device. Set screw provided for locking position.<li>Stem: 1/2″” schedule 40 aluminum pipe with 1/2″” NPT at bottom plus solid brass locknut for mounting.<li>Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.<li>Socket: Porcelain medium base.<li>Wiring:No. 18AWM rated 105?C. <li>Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.</ul>Optional Accessories (Sold Separately):<ul><li>EP17 – PowerPost Mount<li>JB1 – Architectural J-Box<li>JBR-2 thru 24 – In-grade J-Box <li>JBR30 – Staked In-grade J-Box<li>SM18 – Stanchion Mount<li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/120_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

EL161 – Kim Lighting Adjustable Path Lighter Accent / Path Light

$241.24

“<h3>EL161 – Kim Lighting Adjustable Path Lighter Accent / Path Light</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: Accent / Path Lighting (<!– OUI_ALT_CODE –>) Finish: Black, Dark Bronze, Verde Green Series: Adjustable Path Lighter Family: 120 Volt Luminaires Lamping: 50W PAR20 Halogen / 60W A-19 Incandescent Wattage: 50W Halogen / 60W Incandescent Product Details:<ul><li>Housing and Lens Frame: Die-cast low copper alloy aluminum. Lens frame with silicone gasket, attaches to housing with four captive 1/4-20 stainless steel, slotted cap screws.<li>Crook Arm: Formed 1/4″” schedule 40 aluminum pipe. Provides 6″” height adjustment.<li>Scroll and Scroll Collar: Cast aluminum.<li>Transitional Hub: Cast aluminum with anti-rotational set screws.<li>Base Stem: 1/2″” schedule 40 aluminum pipe with 1/2″” NPT at bottom plus solid brass locknut for mounting.<li>Lens: Tempered clear soda lime glass with silicone gasket.<li>Socket: Porcelain medium base.<li>Wiring: No. 18AWM rated 105?C.<li>Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.</ul>Optional Accessories (Sold Separately):<ul><li>EP17 – PowerPost Mount<li>JB1 – Architectural J-Box<li>JBR-2 thru 24 – In-grade J-Box <li>JBR30 – Staked In-grade J-Box<li>SM18 – Stanchion Mount<li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.((Not for use with A-19 lamp.))<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.(Not for use with A-19 lamp.))<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.(Not for use with A-19 lamp.))</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/120_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

EL800 – Kim Lighting Step Light / Path Light

$140.18

“<h3>EL800 – Kim Lighting Step Light / Path Light</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: Path Lighting (<!– OUI_ALT_CODE –>) Finish: Black, Dark Bronze, Verde Green Series: Step Light Family: 120 Volt Luminaires Lamping: T-3 or T-4 Bipin Halogen Wattage: 50W Product Details:<ul><li>Housing: Die-cast low copper alloy aluminum with clear anodized finish. Two 1/2″” NPT in sides. Housing mounts into concrete, brick, or masonry (non-combustible materials). Internal splice area provided behind lamp plate.<li>Lens Frame: Die-cast aluminum, with silicone gasket, attaches to housing with two captive 10-32 stainless steel, hex socket cap screws.<li>Lens: Tempered prismatic glass with silicone gasket, concealed above lens frame opening.<li>Socket: G4 to GY6.35 socket for bipin lamp.<li>Transformer: 120 Volt to 12 Volt, 20 to 50 watt electronic stepdown transformer. <li>Finish: On Lens Frame only, Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>With Integral 120/12 Transformer</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/120_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

EL806 – Kim Lighting Step Light / Path Light

$104.32

“<h3>EL806 – Kim Lighting Step Light / Path Light</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: Path Lighting (<!– OUI_ALT_CODE –>) Finish: Black, Dark Bronze, Verde Green Series: Step Light Family: 120 Volt Luminaires Lamping: Twin Tube Fluorescent 32?F starting temp. Wattage: 9W Product Details:<ul><li>Housing: Die-cast low copper alloy aluminum with clear anodized finish. Two 1/2″” NPT in sides. Housing mounts into concrete, brick, or masonry (non-combustible materials). Internal splice area provided behind lamp plate.<li>Lens Frame: Die-cast aluminum, with silicone gasket, attaches to housing with two captive 10-32 stainless steel, hex socket cap screws.<li>Lens: Tempered prismatic glass with silicone gasket, concealed above lens frame opening.<li>Transformer:9 watt, Normal power factor, 32?F, starting.<li>Finish: On Lens Frame only, Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/120_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

Jack, Tongue, Electric, 3000 lbs, Black

$353.99

The Odyssey series of electric tongue jacks is the only one that comes with an emergency tatchet style crank socket allowing for easy cranking even if the propane tanks are close behind. *Emergency ratchet style crank socket *Water resistant switches*18 inch of travel *Easy bolt on installation *Powder coated finish resists rusting. *Extra large footpad for 3,000 pound unit *Hardened all steel gears *Diecast aluminum cap *Large front light for easy night time viewing *2 inch outer tube on 3,000 pound unit3,000 pound black

Jack, Tongue, Electric, 4000 lbs, Black

$470.99

The Odssey series of electric tongue jacks is the only one that comes with an emergency ratchet style crank socket allowing for easy cranking even if the propane tanks are close behind. *Emergency ratchet style crank socket *Water resistant switches *18 inch of travel *Easy bolt on installation *Powder coated finish resists rusting. *Extra large adjustable footpad for 4,000 pound unit *Hardened all steel gears Diecast aluminum cap *Large front light for easy night time viewing *2 1/4 inch outer tube on 4,000 pound unit.4,000 black

KLV160 – Kim Lighting Bell Accent / Path Light – 12V

$158.11

“<h3>KLV160 – Kim Lighting Bell Accent / Path Light – 12V</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: Accent / Path Lighting (<!– OUI_ALT_CODE –>) Finish: Black, Dark Bronze, Verde Green Series: Bell Family: 12 Volt Luminaires Lamping: MR16 Bipin Halogen Wattage: 50W Product Details:<ul><li>Housing and Lens Frame: Die-cast low copper alloy aluminum. Frame with silicone gasket, attaches to housing with four captive 1/4-20 stainless steel, slotted cap screws.<li>Arm: Cast aluminum. Head is independently rotatable 300? vertically from top dead center. Head may be positioned straight up. Horizontal rotation of entire fixture controlled by installation on mounting device. Set screw provided for locking position.<li>Stem: 1/2″” schedule 40 aluminum pipe with 1/2″” NPT at bottom plus solid brass locknut for mounting.<li>Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. <li>Socket: G4 to GY6.35 socket for bipin lamp. Remote transfomer required.<li>Wiring: 3′ No. 18-2 12 Volt cable with fork connectors.<li>Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available<li>Note: Remote transformer required.</ul>Optional Accessories (Sold Separately):<ul><li>EP17 – PowerPost Mount<li>KLV400 – Spear Mount (Must be installed in concrete)<li>KLV415 – Extension Module<li>JBR30 – Staked In-grade J-Box<li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – Provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/12_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

KLV161 – Kim Lighting Adjustable Path Lighter Accent / Path Light

$241.24

“<h3>KLV161 – Kim Lighting Adjustable Path Lighter Accent / Path Light</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: Accent / Path Lighting (<!– OUI_ALT_CODE –>) Finish: Black, Dark Bronze, Verde Green Series: Adjustable Path Lighter Family: 12 Volt Luminaires Lamping: MR16 Bipin Halogen Wattage: 50W Product Details:<ul><li>Housing and Lens Frame: Die-cast low copper alloy aluminum. Lens frame with silicone gasket, attaches to housing with four captive 1/4-20 stainless steel, slotted cap screws.<li>Crook Arm: Formed 1/4″” schedule 40 aluminum pipe. Provides 6″” height adjustment<li>Scroll and Scroll Collar: Cast aluminum.<li>Transitional Hub: Cast aluminum with anti-rotational set screws.<li>Base Stem: 1/2″” schedule 40 aluminum pipe with 1/2″” NPT at bottom plus solid brass locknut for mounting.<li>Lens: Tempered clear soda lime glass with silicone gasket.<li>Socket: G4 to GY6.35 socket for bipin lamp. Remote transformer required.<li>Wiring: 3′ No. 18-2 12 Volt cable with fork connectors.<li>Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available<li>Note: Remote transformer required.</ul>Optional Accessories (Sold Separately):<ul><li>EP17 – PowerPost Mount<li>KLV400 – Spear Mount (Must be installed in concrete.)<li>JBR30 – Staked In-grade J-Box<li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket. (Not for use withA-19 lamp.))<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket. (Not for use with A-19 lamp.))<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket. (Not for use with A-19 lamp.))</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/12_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

KLV360 – Kim Lighting Minivault In-grade Light

$193.97

“<h3>KLV360 – Kim Lighting Minivault In-grade Light</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: In-grade Lighting (<!– OUI_ALT_CODE –>) Finish: Black, Dark Bronze, Verde Green Series: Minivault Family: 12 Volt Luminaires Lamping: MR16 Bipin Halogen Wattage: 20W – 75W Product Details:<ul><li>Lens Ring: Die-cast low copper alloy aluminum. Five captive 1/4″” blackened stainless steel hex-socket cap screws.<li>Lens: Clear tempered soda lime, 3/16″” thick, flush with lens ring, slightly crowned.<li>Lens Gasket: One piece molded silicone, U-channel wraps completely around lens flange.<li>Housing: Die-cast low copper alloy aluminum, clear anodized prior to finishing.<li>Socket: G4 to GY6.35 socket for bipin lamp, mounted on yoke providing +/-15? vertical adjustment and 340? rotation, locking screws, black anodized gimble ring.<li>Cable: 6′ #18-2 12 Volt cable with fork connector, sealed entry into body with anti-siphon plug.<li>Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over an anodized pre-treatment and chromate conversion coating; 2500 hou salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available.<li>Note: Remote transformer required.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)<li>Internal Louver – Clips onto rim of MR16 lamp and provides additional brightness control.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/12_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

KLV365 – Kim Lighting Minivault In-grade Light

$211.9

“<h3>KLV365 – Kim Lighting Minivault In-grade Light</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: In-grade Lighting (<!– OUI_ALT_CODE –>) Finish: Black, Dark Bronze, Verde Green Series: Minivault Family: 12 Volt Luminaires Lamping: MR16 Bipin Halogen Wattage: 20W – 75W Product Details:<ul><li>Lens Ring: Die-cast low copper aluminum. Five captive 1/4″” blackened stainless steel hex-socket cap screws.<li>Lens: Clear tempered soda lime, 3/16″” thick, flush with lens ring, slightly crowned.<li>Lens Gasket: One piece molded silicone, U-channel wraps completely around lens flange.<li>Housing: Die-cast low copper alloy aluminum.<li>Socket: G4 to GY6.35 socket for bipin lamp, mounted on yoke providing +/-15? vertical adjustment and 340? rotation, locking screws, black anodized gimble ring.<li>Cable: 6′ #18-2 12 Volt cable with fork connector, sealed entry into body with anti-siphon plug.<li>Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over an anodized pre-treatment and chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available.<li>Note: Remote transformer required.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)<li>Internal Louver – Clips onto rim of MR16 lamp and provides additional brightness control.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/12_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

KLV50 – Kim Lighting Bell Accent / Path Light – 12V

$140.18

“<h3>KLV50 – Kim Lighting Bell Accent / Path Light – 12V</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: Accent / Path Lighting (<!– OUI_ALT_CODE –>) Finish: Black, Dark Bronze, Verde Green Series: Bell Family: 12 Volt Luminaires Lamping: MR16 Bipin Halogen Wattage: 50W Product Details:<ul><li>Housing and Lens Frame: Die-cast low copper alloy aluminum. Frame with silicone gasket, attaches to housing with four captive 1/4-20 stainless steel, slotted cap screws.<li>Arm: Cast aluminum. Head is independently rotatable 360? vertically from top dead center. Head may be positioned straight up. Set screw provided for locking position.<li>Wall Plate: Die-cast low copper alloy aluminum. Attaches to stainless steel plate for mounting to any standard electrical outlet box. Internal set screw provided for locking position.<li>Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.<li>Socket: G4 to GY6.35 socket for bipin lamp.<li>Wiring: No. 18-2 12 Volt cord.<li>Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available.<li>Note: Remote transformer required.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/12_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

KLV800 – Kim Lighting Step Light / Path Light

$101.06

“<h3>KLV800 – Kim Lighting Step Light / Path Light</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: Path Lighting (<!– OUI_ALT_CODE –>) Finish: Black, Dark Bronze, Verde Green Series: Step Light Family: 12 Volt Luminaires Lamping: T-3 or T-4 Bipin Halogen Wattage: 50W Product Details:<ul><li>Housing: Die-cast low copper alloy aluminum with clear anodized finish. Two 1/2″” NPT in sides. Housing mounts into concrete, brick, or masonry (non-combustible materials). Internal splice area provided behind lamp plate.<li>Lens Frame: Die-cast aluminum, with silicone gasket, attaches to housing with two captive 10-32 stainless steel, hex socket cap screws.<li>Lens: Tempered prismatic glass with silicone gasket, concealed above lens frame opening.<li>Socket: G4 to GY6.35 socket for bipin lamp.<li>Transformer: Remote transformer required.<li>Finish: On Lens Frame only, Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>Note: Remote transformer required.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/12_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

LTV761 – Kim Lighting Minivault In-grade Light

$260.8

“<h3>LTV761 – Kim Lighting Minivault In-grade Light</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: In-grade Lighting (<!– OUI_ALT_CODE –>) Series: Minivault Family: 120 Volt Luminaires Lamping: PAR20 Halogen In-grade mount only. Wattage: 50W Product Details:<ul><li>Lens Ring: Die-cast brass, natural finish. Five captive 1/4″” blackened stainless steel hex-socket cap screws.<li>Lens: Clear tempered soda lime, 3/16″” thick, flush with lens ring, slightly crowned.<li>Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.<li>Housing: Heavy wall die-cast brass.<li>Integral Junction Box: Die-cast brass with stainless steel flat head slotted screws and molded silicone gasket. Die-cast internal Junction Box cover with silicone gasket and antisiphonplug, two 1/2″” NPT taps in bottom, 12 cu in. volume.<li>Socket: (LTV761) Medium base socket for PAR20 reflector lamps. (LTV764) G4 to GY6.35 socket for bipin lamp. (LTV767) 6 emitters configured in a circular array. All sockets mounted on yoke providing +/-15? vertical adjustment and 340? rotation, locking screws, black anodized gimble ring.<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Optional Half Shield and Rock Guard available separate from fixture.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)<li>Internal Louver – clips onto rim of MR16 lamp and provides additional brightness control. <li>Internal Louver – clips onto rim of PAR20 lamp and provides additional brightness control.<li>Half Shield – for directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Rock Guard – protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Trim Ring – for flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/120_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

LTV761/HS60 – Kim Lighting Minivault In-grade Light w/ Half Shield

$226.57

“<h3>LTV761/HS60 – Kim Lighting Minivault In-grade Light w/ Half Shield</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: In-grade Lighting (<!– OUI_ALT_CODE –>) Series: Minivault Family: 120 Volt Luminaires Lamping: PAR20 Halogen In-grade mount only. Wattage: 50W Product Details:<ul><li>Lens Ring: Die-cast brass, natural finish. Five captive 1/4″” blackened stainless steel hex-socket cap screws.<li>Lens: Clear tempered soda lime, 3/16″” thick, flush with lens ring, slightly crowned.<li>Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.<li>Housing: Heavy wall die-cast brass.<li>Integral Junction Box: Die-cast brass with stainless steel flat head slotted screws and molded silicone gasket. Die-cast internal Junction Box cover with silicone gasket and antisiphonplug, two 1/2″” NPT taps in bottom, 12 cu in. volume.<li>Socket: (LTV761) Medium base socket for PAR20 reflector lamps. (LTV764) G4 to GY6.35 socket for bipin lamp. (LTV767) 6 emitters configured in a circular array. All sockets mounted on yoke providing +/-15? vertical adjustment and 340? rotation, locking screws, black anodized gimble ring.<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Optional Half Shield and Rock Guard available separate from fixture.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)<li>Internal Louver – clips onto rim of MR16 lamp and provides additional brightness control. <li>Internal Louver – clips onto rim of PAR20 lamp and provides additional brightness control.<li>Half Shield – for directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Rock Guard – protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Trim Ring – for flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/120_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

LTV761/RG60 – Kim Lighting Minivault In-grade Light w/ Rock Guard

$249.39

“<h3>LTV761/RG60 – Kim Lighting Minivault In-grade Light w/ Rock Guard</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: In-grade Lighting (<!– OUI_ALT_CODE –>) Series: Minivault Family: 120 Volt Luminaires Lamping: PAR20 Halogen In-grade mount only. Wattage: 50W Product Details:<ul><li>Lens Ring: Die-cast brass, natural finish. Five captive 1/4″” blackened stainless steel hex-socket cap screws.<li>Lens: Clear tempered soda lime, 3/16″” thick, flush with lens ring, slightly crowned.<li>Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.<li>Housing: Heavy wall die-cast brass.<li>Integral Junction Box: Die-cast brass with stainless steel flat head slotted screws and molded silicone gasket. Die-cast internal Junction Box cover with silicone gasket and antisiphonplug, two 1/2″” NPT taps in bottom, 12 cu in. volume.<li>Socket: (LTV761) Medium base socket for PAR20 reflector lamps. (LTV764) G4 to GY6.35 socket for bipin lamp. (LTV767) 6 emitters configured in a circular array. All sockets mounted on yoke providing +/-15? vertical adjustment and 340? rotation, locking screws, black anodized gimble ring.<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Optional Half Shield and Rock Guard available separate from fixture.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)<li>Internal Louver – clips onto rim of MR16 lamp and provides additional brightness control. <li>Internal Louver – clips onto rim of PAR20 lamp and provides additional brightness control.<li>Half Shield – for directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Rock Guard – protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Trim Ring – for flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/120_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

LTV764 – Kim Lighting Minivault In-grade Light

$304.81

“<h3>LTV764 – Kim Lighting Minivault In-grade Light</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: In-grade Lighting (<!– OUI_ALT_CODE –>) Series: Minivault Family: 120 Volt Luminaires Lamping: MR16 Halogen Integral Transformer Wattage: 50W Product Details:<ul><li>Lens Ring: Die-cast brass, natural finish. Five captive 1/4″” blackened stainless steel hex-socket cap screws.<li>Lens: Clear tempered soda lime, 3/16″” thick, flush with lens ring, slightly crowned.<li>Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.<li>Housing: Heavy wall die-cast brass.<li>Integral Junction Box: Die-cast brass with stainless steel flat head slotted screws and molded silicone gasket. Die-cast internal Junction Box cover with silicone gasket and antisiphonplug, two 1/2″” NPT taps in bottom, 12 cu in. volume.<li>Socket: (LTV761) Medium base socket for PAR20 reflector lamps. (LTV764) G4 to GY6.35 socket for bipin lamp. (LTV767) 6 emitters configured in a circular array. All sockets mounted on yoke providing +/-15? vertical adjustment and 340? rotation, locking screws, black anodized gimble ring.<li>Transformer: Integral 120 Volt to 12 Volt, 50 watt electronic stepdown transformer <li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>With Integral 120/12 Transformer<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Optional Half Shield and Rock Guard available separate from fixture.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)<li>Internal Louver – clips onto rim of MR16 lamp and provides additional brightness control. <li>Internal Louver – clips onto rim of PAR20 lamp and provides additional brightness control.<li>Half Shield – for directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Rock Guard – protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Trim Ring – for flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/120_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

LTV764/HS60 – Kim Lighting Minivault In-grade Light w/ Half Shield

$265.69

“<h3>LTV764/HS60 – Kim Lighting Minivault In-grade Light w/ Half Shield</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: In-grade Lighting (<!– OUI_ALT_CODE –>) Series: Minivault Family: 120 Volt Luminaires Lamping: MR16 Halogen Integral Transformer Wattage: 50W Product Details:<ul><li>Lens Ring: Die-cast brass, natural finish. Five captive 1/4″” blackened stainless steel hex-socket cap screws.<li>Lens: Clear tempered soda lime, 3/16″” thick, flush with lens ring, slightly crowned.<li>Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.<li>Housing: Heavy wall die-cast brass.<li>Integral Junction Box: Die-cast brass with stainless steel flat head slotted screws and molded silicone gasket. Die-cast internal Junction Box cover with silicone gasket and antisiphonplug, two 1/2″” NPT taps in bottom, 12 cu in. volume.<li>Socket: (LTV761) Medium base socket for PAR20 reflector lamps. (LTV764) G4 to GY6.35 socket for bipin lamp. (LTV767) 6 emitters configured in a circular array. All sockets mounted on yoke providing +/-15? vertical adjustment and 340? rotation, locking screws, black anodized gimble ring.<li>Transformer: Integral 120 Volt to 12 Volt, 50 watt electronic stepdown transformer <li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>With Integral 120/12 Transformer<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Optional Half Shield and Rock Guard available separate from fixture.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)<li>Internal Louver – clips onto rim of MR16 lamp and provides additional brightness control. <li>Internal Louver – clips onto rim of PAR20 lamp and provides additional brightness control.<li>Half Shield – for directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Rock Guard – protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Trim Ring – for flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/120_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

LTV764/RG60 – Kim Lighting Minivault In-grade Light w/ Rock Guard

$288.51

“<h3>LTV764/RG60 – Kim Lighting Minivault In-grade Light w/ Rock Guard</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: In-grade Lighting (<!– OUI_ALT_CODE –>) Series: Minivault Family: 120 Volt Luminaires Lamping: MR16 Halogen Integral Transformer Wattage: 50W Product Details:<ul><li>Lens Ring: Die-cast brass, natural finish. Five captive 1/4″” blackened stainless steel hex-socket cap screws.<li>Lens: Clear tempered soda lime, 3/16″” thick, flush with lens ring, slightly crowned.<li>Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.<li>Housing: Heavy wall die-cast brass.<li>Integral Junction Box: Die-cast brass with stainless steel flat head slotted screws and molded silicone gasket. Die-cast internal Junction Box cover with silicone gasket and antisiphonplug, two 1/2″” NPT taps in bottom, 12 cu in. volume.<li>Socket: (LTV761) Medium base socket for PAR20 reflector lamps. (LTV764) G4 to GY6.35 socket for bipin lamp. (LTV767) 6 emitters configured in a circular array. All sockets mounted on yoke providing +/-15? vertical adjustment and 340? rotation, locking screws, black anodized gimble ring.<li>Transformer: Integral 120 Volt to 12 Volt, 50 watt electronic stepdown transformer <li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>With Integral 120/12 Transformer<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Optional Half Shield and Rock Guard available separate from fixture.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)<li>Internal Louver – clips onto rim of MR16 lamp and provides additional brightness control. <li>Internal Louver – clips onto rim of PAR20 lamp and provides additional brightness control.<li>Half Shield – for directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Rock Guard – protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Trim Ring – for flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/120_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

LTV766 – Kim Lighting Minivault In-grade Light

$244.5

“<h3>LTV766 – Kim Lighting Minivault In-grade Light</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: In-grade Lighting (<!– OUI_ALT_CODE –>) Finish: Natural Brass Series: Minivault Family: 12 Volt Luminaires Lamping: MR16 Bipin Halogen Wattage: 75W Product Details:<ul><li>Lens Ring: Die-cast brass, natural finish. Five captive 1/4″” blackened stainless steel hex-socket cap screws.<li>Lens: Clear tempered soda lime, 3/10″” thick, flush with lens ring, slightly crowned.<li>Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.<li>Housing: Heavy wall die-cast brass.<li>Socket: G4 to GY6.35 socket for bipin lamp, mounted on yoke providing +/-15? vertical adjustment and 340? rotation, locking screws, black anodized gimble ring.<li>Cable: 6′ #18-2 12 Volt cable with fork connector, sealed entry into body with anti-siphon plug.<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>Optional Trim Ring, Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Optional Half Shield and Rock Guard available separate from fixture<li>Note: Remote transformer required.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)<li>Internal Louver – Clips onto rim of MR16 lamp and provides additional brightness control.<li>Half Shield – For directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. ( Replaces standard lens ring. May be ordered separately. To order assembled with fixture, add to fixture Cat No.)<li>Rock Guard – Protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring.( Replaces standard lens ring. May be ordered separately.To order assembled with fixture, add to fixture Cat No.)<li>Trim Ring – For flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/12_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

LTV766/HS60 – Kim Lighting Minivault In-grade Light w/ Half Shield

$211.9

“<h3>LTV766/HS60 – Kim Lighting Minivault In-grade Light w/ Half Shield</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: In-grade Lighting (<!– OUI_ALT_CODE –>) Finish: Natural Brass Series: Minivault Family: 12 Volt Luminaires Lamping: MR16 Bipin Halogen Wattage: 75W Product Details:<ul><li>Lens Ring: Die-cast brass, natural finish. Five captive 1/4″” blackened stainless steel hex-socket cap screws.<li>Lens: Clear tempered soda lime, 3/10″” thick, flush with lens ring, slightly crowned.<li>Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.<li>Housing: Heavy wall die-cast brass.<li>Socket: G4 to GY6.35 socket for bipin lamp, mounted on yoke providing +/-15? vertical adjustment and 340? rotation, locking screws, black anodized gimble ring.<li>Cable: 6′ #18-2 12 Volt cable with fork connector, sealed entry into body with anti-siphon plug.<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>Optional Trim Ring, Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available.<li>Note: Remote transformer required.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)<li>Internal Louver – Clips onto rim of MR16 lamp and provides additional brightness control.<li>Half Shield – For directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. ( Replaces standard lens ring. May be ordered separately. To order assembled with fixture, add to fixture Cat No.)<li>Rock Guard – Protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring.( Replaces standard lens ring. May be ordered separately.To order assembled with fixture, add to fixture Cat No.)<li>Trim Ring – For flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/12_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

LTV766/RG60 – Kim Lighting Minivault In-grade Light w/ Rock Guard

$236.35

“<h3>LTV766/RG60 – Kim Lighting Minivault In-grade Light w/ Rock Guard</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: In-grade Lighting (<!– OUI_ALT_CODE –>) Finish: Natural Brass Series: Minivault Family: 12 Volt Luminaires Lamping: MR16 Bipin Halogen Wattage: 75W Product Details:<ul><li>Lens Ring: Die-cast brass, natural finish. Five captive 1/4″” blackened stainless steel hex-socket cap screws.<li>Lens: Clear tempered soda lime, 3/10″” thick, flush with lens ring, slightly crowned.<li>Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.<li>Housing: Heavy wall die-cast brass.<li>Socket: G4 to GY6.35 socket for bipin lamp, mounted on yoke providing +/-15? vertical adjustment and 340? rotation, locking screws, black anodized gimble ring.<li>Cable: 6′ #18-2 12 Volt cable with fork connector, sealed entry into body with anti-siphon plug.<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>Optional Trim Ring, Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available.<li>Note: Remote transformer required.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)<li>Internal Louver – Clips onto rim of MR16 lamp and provides additional brightness control.<li>Half Shield – For directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. ( Replaces standard lens ring. May be ordered separately. To order assembled with fixture, add to fixture Cat No.)<li>Rock Guard – Protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring.( Replaces standard lens ring. May be ordered separately.To order assembled with fixture, add to fixture Cat No.)<li>Trim Ring – For flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/12_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

LTV767 – Kim Lighting Minivault In-grade Light

$467.81

“<h3>LTV767 – Kim Lighting Minivault In-grade Light</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: In-grade Lighting (<!– OUI_ALT_CODE –>) Series: Minivault Family: 120 Volt Luminaires Lamping: 6 Emitters LED Wattage: 6W Product Details:<ul><li>Lens Ring: Die-cast brass, natural finish. Five captive 1/4″” blackened stainless steel hex-socket cap screws.<li>Lens: Clear tempered soda lime, 3/16″” thick, flush with lens ring, slightly crowned.<li>Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.<li>Housing: Heavy wall die-cast brass.<li>Integral Junction Box: Die-cast brass with stainless steel flat head slotted screws and molded silicone gasket. Die-cast internal Junction Box cover with silicone gasket and antisiphonplug, two 1/2″” NPT taps in bottom, 12 cu in. volume.<li>Socket: (LTV761) Medium base socket for PAR20 reflector lamps. (LTV764) G4 to GY6.35 socket for bipin lamp. (LTV767) 6 emitters configured in a circular array. All sockets mounted on yoke providing +/-15? vertical adjustment and 340? rotation, locking screws, black anodized gimble ring.<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>With Integral 120/12 Transformer<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Optional Half Shield and Rock Guard available separate from fixture.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)<li>Internal Louver – clips onto rim of MR16 lamp and provides additional brightness control. <li>Internal Louver – clips onto rim of PAR20 lamp and provides additional brightness control.<li>Half Shield – for directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Rock Guard – protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Trim Ring – for flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/120_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

LTV767/HS60 – Kim Lighting Minivault In-grade Light w/ Half Shield

$467.81

“<h3>LTV767/HS60 – Kim Lighting Minivault In-grade Light w/ Half Shield</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: In-grade Lighting (<!– OUI_ALT_CODE –>) Series: Minivault Family: 120 Volt Luminaires Lamping: 6 Emitters LED Wattage: 6W Product Details:<ul><li>Lens Ring: Die-cast brass, natural finish. Five captive 1/4″” blackened stainless steel hex-socket cap screws.<li>Lens: Clear tempered soda lime, 3/16″” thick, flush with lens ring, slightly crowned.<li>Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.<li>Housing: Heavy wall die-cast brass.<li>Integral Junction Box: Die-cast brass with stainless steel flat head slotted screws and molded silicone gasket. Die-cast internal Junction Box cover with silicone gasket and antisiphonplug, two 1/2″” NPT taps in bottom, 12 cu in. volume.<li>Socket: (LTV761) Medium base socket for PAR20 reflector lamps. (LTV764) G4 to GY6.35 socket for bipin lamp. (LTV767) 6 emitters configured in a circular array. All sockets mounted on yoke providing +/-15? vertical adjustment and 340? rotation, locking screws, black anodized gimble ring.<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>With Integral 120/12 Transformer<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Optional Half Shield and Rock Guard available separate from fixture.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)<li>Internal Louver – clips onto rim of MR16 lamp and provides additional brightness control. <li>Internal Louver – clips onto rim of PAR20 lamp and provides additional brightness control.<li>Half Shield – for directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Rock Guard – protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Trim Ring – for flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/120_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

LTV767/RG60 – Kim Lighting Minivault In-grade Light w/ Rock Guard

$467.81

“<h3>LTV767/RG60 – Kim Lighting Minivault In-grade Light w/ Rock Guard</h3>Above image represents the general form of the fixture. Please refer to product finish and details for exact information. Fixture Type: In-grade Lighting (<!– OUI_ALT_CODE –>) Series: Minivault Family: 120 Volt Luminaires Lamping: 6 Emitters LED Wattage: 6W Product Details:<ul><li>Lens Ring: Die-cast brass, natural finish. Five captive 1/4″” blackened stainless steel hex-socket cap screws.<li>Lens: Clear tempered soda lime, 3/16″” thick, flush with lens ring, slightly crowned.<li>Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.<li>Housing: Heavy wall die-cast brass.<li>Integral Junction Box: Die-cast brass with stainless steel flat head slotted screws and molded silicone gasket. Die-cast internal Junction Box cover with silicone gasket and antisiphonplug, two 1/2″” NPT taps in bottom, 12 cu in. volume.<li>Socket: (LTV761) Medium base socket for PAR20 reflector lamps. (LTV764) G4 to GY6.35 socket for bipin lamp. (LTV767) 6 emitters configured in a circular array. All sockets mounted on yoke providing +/-15? vertical adjustment and 340? rotation, locking screws, black anodized gimble ring.<li>Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.<li>With Integral 120/12 Transformer<li>Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Optional Half Shield and Rock Guard available separate from fixture.</ul>Optional Accessories (Sold Separately):<ul><li>Colored Lens (Replaces standard clear lens)<li>Hex Cell Louver – provides additional brightness control. (Inserts behind lens into existing lens gasket.)<li>Prismatic Lens – prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)<li>Spread Lens – linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)<li>Internal Louver – clips onto rim of MR16 lamp and provides additional brightness control. <li>Internal Louver – clips onto rim of PAR20 lamp and provides additional brightness control.<li>Half Shield – for directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Rock Guard – protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)<li>Trim Ring – for flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.</ul><a href=’http://www.lightingbygregory.com/pdfs/kim_lighting/120_volt_matrix.pdf’ target=’_blank’>Click here to view Options and Accessories application guidelines</a>.”

Line Voltage Track Head – Series: Halo Series, Finish: Black

$91.95

Pictured in white – WAC5143: Features: -Line voltage track head.-Available in Halo, Juno or Lightolier Series.-Two aiming screws allow for locking fixture aiming angle.-Has integral aiming indicators to assure precise directional adjustment.-Threaded easy turn check ring within lens cap allows for multiple captive accessories.-Accommodates one lens and one accessory.-Ideal for general retail and hospitality lighting applications.-UL and cUL listed. Options: -Available in black, white or combination of platinum and black finish. Construction: -Die cast aluminum construction. Color/Finish: -Abrasion resistant paint finish. Specifications: -Line voltage track heads using PAR38 lamps.-Medium base 250V porcelain socket with nickel plated copper screw shell.-350 Horizontal rotation and 90 vertical aiming with built-in degree scales on fixture.-Accommodates 150W PAR38 incandescent bulb. Warranty: -Manufacturer provides a five year warranty.

Line Voltage Track Head – Series: Halo Series, Finish: Black

$86.5

Pictured in black – WAC5141: Features: -Line voltage track head.-Available in Halo, Juno or Lightolier Series.-Two aiming screws allow for locking fixture aiming angle.-Has integral aiming indicators to assure precise directional adjustment.-Threaded easy turn check ring within lens cap allows for multiple captive accessories.-Accommodates one lens and one accessory.-May be used with a range of lenses and louvers.-UL and cUL listed. Options: -Available in black, white or combination of platinum and black finish. Construction: -Die cast aluminum construction. Color/Finish: -Abrasion resistant paint finish.-Ideal for retail and hospitality accent lighting applications. Specifications: -Medium base 250V porcelain socket with nickel plated copper screw shell.-350 Horizontal rotation and 90 vertical aiming with built-in degree scales on fixture.-Accommodates 75W PAR30 incandescent bulb. Warranty: -Manufacturer provides a five year warranty.

Line Voltage Track Head – Series: Halo Series, Finish: White

$86.5

Pictured in black – WAC5141: Features: -Line voltage track head.-Available in Halo, Juno or Lightolier Series.-Two aiming screws allow for locking fixture aiming angle.-Has integral aiming indicators to assure precise directional adjustment.-Threaded easy turn check ring within lens cap allows for multiple captive accessories.-Accommodates one lens and one accessory.-May be used with a range of lenses and louvers.-UL and cUL listed. Options: -Available in black, white or combination of platinum and black finish. Construction: -Die cast aluminum construction. Color/Finish: -Abrasion resistant paint finish.-Ideal for retail and hospitality accent lighting applications. Specifications: -Medium base 250V porcelain socket with nickel plated copper screw shell.-350 Horizontal rotation and 90 vertical aiming with built-in degree scales on fixture.-Accommodates 75W PAR30 incandescent bulb. Warranty: -Manufacturer provides a five year warranty.

Line Voltage Track Head – Series: Halo Series, Finish: White

$91.95

Pictured in white – WAC5143: Features: -Line voltage track head.-Available in Halo, Juno or Lightolier Series.-Two aiming screws allow for locking fixture aiming angle.-Has integral aiming indicators to assure precise directional adjustment.-Threaded easy turn check ring within lens cap allows for multiple captive accessories.-Accommodates one lens and one accessory.-Ideal for general retail and hospitality lighting applications.-UL and cUL listed. Options: -Available in black, white or combination of platinum and black finish. Construction: -Die cast aluminum construction. Color/Finish: -Abrasion resistant paint finish. Specifications: -Line voltage track heads using PAR38 lamps.-Medium base 250V porcelain socket with nickel plated copper screw shell.-350 Horizontal rotation and 90 vertical aiming with built-in degree scales on fixture.-Accommodates 150W PAR38 incandescent bulb. Warranty: -Manufacturer provides a five year warranty.

Line Voltage Track Head – Series: Juno Series, Finish: Black

$93.75

Pictured in white – WAC5143: Features: -Line voltage track head.-Available in Halo, Juno or Lightolier Series.-Two aiming screws allow for locking fixture aiming angle.-Has integral aiming indicators to assure precise directional adjustment.-Threaded easy turn check ring within lens cap allows for multiple captive accessories.-Accommodates one lens and one accessory.-Ideal for general retail and hospitality lighting applications.-UL and cUL listed. Options: -Available in black, white or combination of platinum and black finish. Construction: -Die cast aluminum construction. Color/Finish: -Abrasion resistant paint finish. Specifications: -Line voltage track heads using PAR38 lamps.-Medium base 250V porcelain socket with nickel plated copper screw shell.-350 Horizontal rotation and 90 vertical aiming with built-in degree scales on fixture.-Accommodates 150W PAR38 incandescent bulb. Warranty: -Manufacturer provides a five year warranty.

Line Voltage Track Head – Series: Juno Series, Finish: White

$93.75

Pictured in white – WAC5143: Features: -Line voltage track head.-Available in Halo, Juno or Lightolier Series.-Two aiming screws allow for locking fixture aiming angle.-Has integral aiming indicators to assure precise directional adjustment.-Threaded easy turn check ring within lens cap allows for multiple captive accessories.-Accommodates one lens and one accessory.-Ideal for general retail and hospitality lighting applications.-UL and cUL listed. Options: -Available in black, white or combination of platinum and black finish. Construction: -Die cast aluminum construction. Color/Finish: -Abrasion resistant paint finish. Specifications: -Line voltage track heads using PAR38 lamps.-Medium base 250V porcelain socket with nickel plated copper screw shell.-350 Horizontal rotation and 90 vertical aiming with built-in degree scales on fixture.-Accommodates 150W PAR38 incandescent bulb. Warranty: -Manufacturer provides a five year warranty.

Line Voltage Track Head – Series: Juno Series, Finish: White

$86.5

Pictured in black – WAC5141: Features: -Line voltage track head.-Available in Halo, Juno or Lightolier Series.-Two aiming screws allow for locking fixture aiming angle.-Has integral aiming indicators to assure precise directional adjustment.-Threaded easy turn check ring within lens cap allows for multiple captive accessories.-Accommodates one lens and one accessory.-May be used with a range of lenses and louvers.-UL and cUL listed. Options: -Available in black, white or combination of platinum and black finish. Construction: -Die cast aluminum construction. Color/Finish: -Abrasion resistant paint finish.-Ideal for retail and hospitality accent lighting applications. Specifications: -Medium base 250V porcelain socket with nickel plated copper screw shell.-350 Horizontal rotation and 90 vertical aiming with built-in degree scales on fixture.-Accommodates 75W PAR30 incandescent bulb. Warranty: -Manufacturer provides a five year warranty.

Line Voltage Track Head – Series: Lightolier Series, Finish: Black

$86.5

Pictured in black – WAC5141: Features: -Line voltage track head.-Available in Halo, Juno or Lightolier Series.-Two aiming screws allow for locking fixture aiming angle.-Has integral aiming indicators to assure precise directional adjustment.-Threaded easy turn check ring within lens cap allows for multiple captive accessories.-Accommodates one lens and one accessory.-May be used with a range of lenses and louvers.-UL and cUL listed. Options: -Available in black, white or combination of platinum and black finish. Construction: -Die cast aluminum construction. Color/Finish: -Abrasion resistant paint finish.-Ideal for retail and hospitality accent lighting applications. Specifications: -Medium base 250V porcelain socket with nickel plated copper screw shell.-350 Horizontal rotation and 90 vertical aiming with built-in degree scales on fixture.-Accommodates 75W PAR30 incandescent bulb. Warranty: -Manufacturer provides a five year warranty.

Line Voltage Track Head – Series: Lightolier Series, Finish: White

$91.95

Pictured in white – WAC5143: Features: -Line voltage track head.-Available in Halo, Juno or Lightolier Series.-Two aiming screws allow for locking fixture aiming angle.-Has integral aiming indicators to assure precise directional adjustment.-Threaded easy turn check ring within lens cap allows for multiple captive accessories.-Accommodates one lens and one accessory.-Ideal for general retail and hospitality lighting applications.-UL and cUL listed. Options: -Available in black, white or combination of platinum and black finish. Construction: -Die cast aluminum construction. Color/Finish: -Abrasion resistant paint finish. Specifications: -Line voltage track heads using PAR38 lamps.-Medium base 250V porcelain socket with nickel plated copper screw shell.-350 Horizontal rotation and 90 vertical aiming with built-in degree scales on fixture.-Accommodates 150W PAR38 incandescent bulb. Warranty: -Manufacturer provides a five year warranty.

MADE Rubberized Camera Armor (Black) + LP-E5 + 8GB SD Card + Cleaning Kit for Canon XS, XSi & T1i

$34.95

Protect your valuable Canon Rebel XSi XS T1i or T2i with this Elastomeric Silicone Body & Lens Armor! Custom Engineered for the Canon Rebel XSi XS T1i & T2i Camera Armor is an always on protection system consisting of 6 parts: An elastomeric silicone Body Armor Base Plate Tripod Socket extender Lens Armor Lens Cap Lanyard and a Polycarbonate LCD Shield. The precise fit covers up all of the important parts of your DSLR camera to protect it from impact abrasion dust and fingerprints without sacrificing any necessary camera functions or adding additional weight. Camera Armor provides protection in action and is uniquely designed so that all of the camera controls and access ports are completely functional and accessible without taking the camera out of the jacket. You can put the Camera Armor on your camera and leave it there while in your bag or taking pictures. For maximum protection this Camera Armor comes equipped with Lens Armor and lens cap lanyard as well as a clear polycarbonate LCD shield that protects the rear LCD screen from daily abuse. Key Features: Camera Armor package designed specifically for your Canon Rebel XSi XS T1i & T2i! Camera Armor is made of a proprietary silicone blend that is UV stable and will not fade deform or deteriorate over the lifetime of your camera. Great For: Outdoor use Multiple Camera use Sporting Events Inclement Weather Conditions Hiking Hunting Birding Snowboarding Skiing etc. Improved camera grip to avoid accidental drops Lens Armor fits most 52-77mm filter lenses Dimensions (WxHxD): 5.1 x 3.8 x 2.4 in./128.8 x 97.5 x 61.9mm Weight: 4.4oz/ 120g

MADE Rubberized Camera Armor (Black) + LP-E5 + Cleaning Cloth for Canon Rebel XS, XSi & T1i

$19.95

Protect your valuable Canon Rebel XSi XS T1i or T2i with this Elastomeric Silicone Body & Lens Armor! Custom Engineered for the Canon Rebel XSi XS T1i & T2i Camera Armor is an always on protection system consisting of 6 parts: An elastomeric silicone Body Armor Base Plate Tripod Socket extender Lens Armor Lens Cap Lanyard and a Polycarbonate LCD Shield. The precise fit covers up all of the important parts of your DSLR camera to protect it from impact abrasion dust and fingerprints without sacrificing any necessary camera functions or adding additional weight. Camera Armor provides protection in action and is uniquely designed so that all of the camera controls and access ports are completely functional and accessible without taking the camera out of the jacket. You can put the Camera Armor on your camera and leave it there while in your bag or taking pictures. For maximum protection this Camera Armor comes equipped with Lens Armor and lens cap lanyard as well as a clear polycarbonate LCD shield that protects the rear LCD screen from daily abuse. Key Features: Camera Armor package designed specifically for your Canon Rebel XSi XS T1i & T2i! Camera Armor is made of a proprietary silicone blend that is UV stable and will not fade deform or deteriorate over the lifetime of your camera. Great For: Outdoor use Multiple Camera use Sporting Events Inclement Weather Conditions Hiking Hunting Birding Snowboarding Skiing etc. Improved camera grip to avoid accidental drops Lens Armor fits most 52-77mm filter lenses Dimensions (WxHxD): 5.1 x 3.8 x 2.4 in./128.8 x 97.5 x 61.9mm Weight: 4.4oz/ 120g

MADE Rubberized Camera Armor Case (Black) + 2x LP-E8 & Charger + Accessory Kit for Canon Rebel T2i

$34.95

Protect your valuable Canon Rebel XSi XS T1i or T2i with this Elastomeric Silicone Body & Lens Armor! Custom Engineered for the Canon Rebel XSi XS T1i & T2i Camera Armor is an always on protection system consisting of 6 parts: An elastomeric silicone Body Armor Base Plate Tripod Socket extender Lens Armor Lens Cap Lanyard and a Polycarbonate LCD Shield. The precise fit covers up all of the important parts of your DSLR camera to protect it from impact abrasion dust and fingerprints without sacrificing any necessary camera functions or adding additional weight. Camera Armor provides protection in action and is uniquely designed so that all of the camera controls and access ports are completely functional and accessible without taking the camera out of the jacket. You can put the Camera Armor on your camera and leave it there while in your bag or taking pictures. For maximum protection this Camera Armor comes equipped with Lens Armor and lens cap lanyard as well as a clear polycarbonate LCD shield that protects the rear LCD screen from daily abuse. Key Features: Camera Armor package designed specifically for your Canon Rebel XSi XS T1i & T2i! Camera Armor is made of a proprietary silicone blend that is UV stable and will not fade deform or deteriorate over the lifetime of your camera. Great For: Outdoor use Multiple Camera use Sporting Events Inclement Weather Conditions Hiking Hunting Birding Snowboarding Skiing etc. Improved camera grip to avoid accidental drops Lens Armor fits most 52-77mm filter lenses Dimensions (WxHxD): 5.1 x 3.8 x 2.4 in./128.8 x 97.5 x 61.9mm Weight: 4.4oz/ 120g

MADE Rubberized Camera Armor Case (Black) + LP-E8 + Tripod + Accessory Kit for Canon XS, XSi & T1i

$39.95

Protect your valuable Canon Rebel XSi XS T1i or T2i with this Elastomeric Silicone Body & Lens Armor! Custom Engineered for the Canon Rebel XSi XS T1i & T2i Camera Armor is an always on protection system consisting of 6 parts: An elastomeric silicone Body Armor Base Plate Tripod Socket extender Lens Armor Lens Cap Lanyard and a Polycarbonate LCD Shield. The precise fit covers up all of the important parts of your DSLR camera to protect it from impact abrasion dust and fingerprints without sacrificing any necessary camera functions or adding additional weight. Camera Armor provides protection in action and is uniquely designed so that all of the camera controls and access ports are completely functional and accessible without taking the camera out of the jacket. You can put the Camera Armor on your camera and leave it there while in your bag or taking pictures. For maximum protection this Camera Armor comes equipped with Lens Armor and lens cap lanyard as well as a clear polycarbonate LCD shield that protects the rear LCD screen from daily abuse. Key Features: Camera Armor package designed specifically for your Canon Rebel XSi XS T1i & T2i! Camera Armor is made of a proprietary silicone blend that is UV stable and will not fade deform or deteriorate over the lifetime of your camera. Great For: Outdoor use Multiple Camera use Sporting Events Inclement Weather Conditions Hiking Hunting Birding Snowboarding Skiing etc. Improved camera grip to avoid accidental drops Lens Armor fits most 52-77mm filter lenses Dimensions (WxHxD): 5.1 x 3.8 x 2.4 in./128.8 x 97.5 x 61.9mm Weight: 4.4oz/ 120g

MADE Rubberized Camera Armor Case for Canon Rebel T2i (Black) with LP-E8 Battery + Cleaning Kit

$24.95

Protect your valuable Canon Rebel XSi XS T1i or T2i with this Elastomeric Silicone Body & Lens Armor! Custom Engineered for the Canon Rebel XSi XS T1i & T2i Camera Armor is an always on protection system consisting of 6 parts: An elastomeric silicone Body Armor Base Plate Tripod Socket extender Lens Armor Lens Cap Lanyard and a Polycarbonate LCD Shield. The precise fit covers up all of the important parts of your DSLR camera to protect it from impact abrasion dust and fingerprints without sacrificing any necessary camera functions or adding additional weight. Camera Armor provides protection in action and is uniquely designed so that all of the camera controls and access ports are completely functional and accessible without taking the camera out of the jacket. You can put the Camera Armor on your camera and leave it there while in your bag or taking pictures. For maximum protection this Camera Armor comes equipped with Lens Armor and lens cap lanyard as well as a clear polycarbonate LCD shield that protects the rear LCD screen from daily abuse. Key Features: Camera Armor package designed specifically for your Canon Rebel XSi XS T1i & T2i! Camera Armor is made of a proprietary silicone blend that is UV stable and will not fade deform or deteriorate over the lifetime of your camera. Great For: Outdoor use Multiple Camera use Sporting Events Inclement Weather Conditions Hiking Hunting Birding Snowboarding Skiing etc. Improved camera grip to avoid accidental drops Lens Armor fits most 52-77mm filter lenses Dimensions (WxHxD): 5.1 x 3.8 x 2.4 in./128.8 x 97.5 x 61.9mm Weight: 4.4oz/ 120g

MSD 31653 Wire Set Black SC Small Block Chevy Socket Cap

$82.99

Speed Unlimited carries the full line of MSD components. We are an Authorized MSD Warehouse Distributor. This is a brand new in the box MSD BLACK 8.5 MM Super Conductor Spark Plug Wires. M46-31653 Superior conductivity wires from MSD.MSD’s 8.5mm Super Conductor wire sets have a special helically wound core that has just 40-50 ohms of resistance per foot–but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 feet of tightly wound copper for superior conductivity. A tough 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. They come available in custom or universal-fit applications. APPLICATION:Spark Plug Wires, Super Conductor, Spiral Core, 8.5mm, Black, 90 Degree Plug Boot, Chevy/ GMC, Small Block, V8Fits Female/Socket Style Caps – Wires rout over the valve covers.

MSD 5530 Street Fire Spark Plug Wire

$36.99

Speed Unlimited carries the full line of MSD components. We are an Authorized MSD Warehouse Distributor. This is a brand new in the box MSD #5530 Black 8 MM Street Fire Spark Plug Wire Set. M46-5530Street Fire is a new brand from MSD Ignition that delivers quality products at a great value! These wires are inspected and tested by MSD engineers and even carry a one year warranty!FEATURES:Black 8mm silicone and synthetic jacket for high resistance to heat and abrasion. Helically wound conductor suppresses EMI. Kevlar core combination for great strength and durability. Low, 500 ohms per foot resistance for improved spark delivery. Silicone boots protect against high heat. Heavy duty terminals for secure connections.APPLICATION:Chrysler 318-360 with Socket Distributor Cap

MSD 5561 Street Fire Spark Plug Wire

$38.95

Speed Unlimited carries the full line of MSD components. We are an Authorized MSD Warehouse Distributor. This is a brand new in the box MSD #5561 Black 8 MM Street Fire Spark Plug Wire Set. M46-5561Street Fire is a new brand from MSD Ignition that delivers quality products at a great value! These wires are inspected and tested by MSD engineers and even carry a one year warranty!FEATURES:Black 8mm silicone and synthetic jacket for high resistance to heat and abrasion. Helically wound conductor suppresses EMI. Kevlar core combination for great strength and durability. Low, 500 ohms per foot resistance for improved spark delivery. Silicone boots protect against high heat. Heavy duty terminals for secure connections.APPLICATION:Chevy 366-454 with Socket Style Distributor Cap

MSD 84811 LT-1 Distributor Cap & Rotor Kit

$144.99

MSD #84811 Cap and Rotor, Black/Red, Female/Socket, Brass Terminals, Screw-Down, Buick, Chevy, Pontiac, 4.3/5.7L, V8, LT1, Fits Optispark II, 1994 1/2 – 1997, Kit. M46-84811 Description:Finally a high quality Cap and Rotor for the front mount LT1 distributor! LT1 fans have been searching for a cap that could deliver the performance of the LT1 and MSD is happy to bring it to them. Remember, changing the cap and rotor on this engine is no walk in the park. So when you do it, you want to make sure to install the best parts possible and the MSD Cap and Rotor deliver. The all-new cap housing is injection molded from a special DuPont material that provides extreme strength and high di electric properties resulting in less chance of breakdown causing a misfire. The terminal paths are encased in a durable epoxy compound for even more protection. The rotor is also an all-new molded piece with a brass/stainless rotor tip design. This kit fits the Optispark II vented pin drive OE distributor or MSD-83811 distributor. To determine which Optispark you have check for two vacuum hoses on the driver’s side lower corner of the Optispark, behind the plug wires. The Optispark II has the two vacuum hoses and the Optispark I does not.

Perko 1127 Series Red & Green Side Lights

$169.99

Perko 1127 Series Red & Green Side Lights . Black plastic Pre-wired double-contact socket and 3 feet of 16/3-SO cable Watertight access cap for rebulbing and cleaning Bulb: 12, 24, 32 or 120 Volt (not included) Screw Size: 1/4″ Height Overall: 7-1/2″ Height Lens: 4-1/2″

Perko White Masthead Light

$169.99

Perko White Masthead Light . Black Plastic Base Pre-Wired Double Contact Bayonet Socket and 3 Feet of 16/3-SO Cable Watertight Access Cap for Rebulbing and Cleaning 225 Visibility Arc, 5 Visibility Miles Bulb: 12, 24, 32 or 120 Volt (Bulb Not Included) Height Overall: 7-1/2″ Height Lens: 4-1/4″ Screw Size: 1/4″

Hammond B3 Keycomb Rehab – Part 2

Recent Posts